Car Tinting Rockingham
Car tinting in Rockingham starts from $249 for a standard passenger vehicle, with most vehicles falling between $249 and $550. The final figure depends on the vehicle's size, window layout, existing glass and the film selected.
Quick answer: Protec Glass Tinting is a mobile-only service. We assess the vehicle, the installation location, the factory glass and Western Australian tint requirements before recommending a film. Both ranges fitted, SunTek CIR and Rayno Phantom S9, carry a lifetime manufacturer warranty subject to manufacturer terms.
We bring our mobile tinting service to Rockingham as part of our car tinting Perth work, fitting the film on your driveway or at the office. For the coolest cabin without going darker, ask about ceramic window film. Neighbouring areas we cover include Baldivis, Mandurah and Fremantle.
Is mobile car tinting available?
Yes. Protec Glass Tinting travels to your home or workplace in Rockingham, so you never need to take the vehicle to a shopfront or workshop. A clean, dry and reasonably sheltered carport, garage or covered parking bay is needed to complete the installation properly.
Mobile fitting works best where the vehicle is protected from rain, wind and airborne dust while the glass is prepared and the film applied. An exposed driveway or open public car park often will not give suitable conditions, so the location is checked before the appointment is confirmed.
What the mobile service needs
- A clean, dry working area
- Shelter from rain, wind, dust and direct exposure
- A carport, garage or covered parking bay
- Room for safe access around the vehicle and for doors to open
Protec Glass Tinting covers Rockingham and the surrounding suburbs, including Baldivis, Safety Bay, Shoalwater, Warnbro, Waikiki, Port Kennedy, Secret Harbour, Cooloongup and Kwinana.
Mobile Vehicle Tinting at Your Home or Workplace
Vehicles We Tint
Mobile tinting suits hatchbacks, sedans, wagons, coupes, SUVs, utes, people movers and four-wheel drives. Body style changes the glass area, the shape of the rear window and the access around each door frame, so film selection is assessed vehicle by vehicle rather than from a standard list.
A vehicle with dark factory privacy glass needs a different approach from one with clear glass, because the finished visible light transmission is measured through the glass and film together. We weigh daylight visibility, glare, heat control and privacy against what the vehicle's existing glass allows.
Details that give you an accurate quote
- Vehicle make, model, year and body style
- Your suburb, and whether a garage, carport or covered bay is available
- The condition of any existing tint, with photographs where useful
- Your preferred result: a lighter appearance, lower glare, or more privacy
- Whether the vehicle has factory privacy glass or film already fitted
Supplying these upfront lets the film and the fitting conditions be settled before the vehicle is booked, which avoids an appointment delayed by weather or an unsuitable work area.
Car Tinting Prices and Film Choices
What Affects the Price
Tinting is quoted per vehicle rather than off a flat rate. Larger glass areas, extra quarter windows, curved rear glass, body style, the removal of old film and the chosen range all change the work involved. Most vehicles fall within the $249 to $550 range, with ceramic options sitting toward the upper end of it.
Mention factory privacy glass when you ask for a quote. How dark the glass looks does not confirm what the finished visible light transmission will be once film is added, and that reading is what determines whether the result is legal.
What affects the final price?
| Quote factor | Why it changes the quote |
|---|---|
| Vehicle size and body style | More glass means more film and more installation time |
| Window layout | Quarter windows and curved rear glass take longer to handle |
| Factory privacy glass | Changes the finished appearance and the combined VLT reading |
| Old tint removal | Peeling or bubbling film must be stripped before fitting |
Ceramic Film Options
SunTek CIR is a nano-ceramic range; Rayno Phantom S9 is a nano carbon ceramic range. Both carry a lifetime manufacturer warranty, subject to manufacturer terms. VLT is visible light transmission, how much visible light passes through. TSER is total solar energy rejected, the figure to compare when heat is the priority.
SunTek CIR holds the Skin Cancer Foundation Seal of Recommendation for 99%+ UV protection across 300 to 380 nm. These are manufacturer-published product specifications: they compare variants usefully, but the legal VLT of a finished window still depends on the factory glass and film together.
Manufacturer-published film specifications
| Film variant | VLT | TSER | UV protection |
|---|---|---|---|
| SunTek CIR 70 Black | 71% | 46% | >99% |
| SunTek CIR 35 Black | 35% | 52% | >99% |
| SunTek CIR 20 Black | 22% | 58% | >99% |
| Rayno Phantom S9-50 | 50% | 53% | >99.99% |
| Rayno Phantom S9-35 | 35% | 58% | >99.99% |
| Rayno Phantom S9-20 | 20% | 64% | >99.99% |
Specification source: SunTek CIR and Rayno Phantom S9 manufacturer-published product data. Warranty coverage is subject to the relevant manufacturer documentation and terms.
What are the legal window tint rules in Western Australia?
In WA, legal VLT is measured through the factory glass and installed film together. Windows forward of the "B" pillar must allow at least 35% VLT; windows behind it must allow at least 20% where ADR14-compliant external mirrors are fitted on both sides. Windscreen film is limited to a narrow top band, and reflectance cannot exceed 10%.
The film label alone does not determine legality. Under Department of Transport bulletin IB-119D, the Road Traffic (Vehicles) Regulations 2014 and ADR14, it is the installed result that must comply.
The requirements in short
- Forward of the "B" pillar: at least 35% combined VLT
- Behind the "B" pillar: at least 20% combined VLT, with ADR14-compliant external rear vision mirrors on both sides
- Windscreen: no film except a top band above the wiper sweep, outside the primary vision area, covering no more than 10% of the windscreen
- Reflectance no more than 10%, so mirror-look film is not permitted
A film marked 35% or 20% is therefore not automatically legal once applied to factory glass. Requirements can change, so check the current official guidance before installation.
Is 35% tint legal on front windows in WA?
A 35% film can be legal on front windows in WA, but only if the combined VLT of the factory glass and installed film stays at or above 35% forward of the "B" pillar. The label alone does not prove legality, because the glass and film are measured together.
SunTek CIR 35 Black and Rayno Phantom S9-35 both carry a published VLT of 35%. Those figures describe the film, not the finished window, so a 35% film on glass that already reduces light can land under the minimum.
What to check
- Confirm the window sits forward of the "B" pillar
- Assess the vehicle's original glass before choosing a film
- Check the final combined VLT rather than the product label
- Keep reflectance at or under 10% and avoid mirror-look film
The windscreen is separate: film is limited to a top band above the wiper sweep, outside the primary vision area, covering no more than 10% of the windscreen area.
Western Australian Legal Tint Shades and Compliance
How Final VLT Is Measured
Legal VLT is measured through the factory glass and the installed film together. A film marked at a given VLT can produce a different finished reading on glass that already carries factory tint or privacy colouring, which is why front and rear glass are assessed separately rather than from the product label.
Windscreen and Reflective Film Limits
No film may be applied across the driver's primary viewing area. A top band is permitted only where it stays above the wiper sweep, outside the primary vision area and covers no more than 10% of the windscreen. Reflectance must not exceed 10%, and mirror-look film is not permitted on any window.
WA compliance overview
| Glass area | Requirement | What it means for you |
|---|---|---|
| Forward of the "B" pillar | Minimum 35% VLT through glass and film together | A film label alone cannot confirm compliance |
| Behind the "B" pillar | Minimum 20% VLT with ADR14-compliant external mirrors on both sides | Rear glass may be darker, but still has a limit |
| Main windscreen | No film except a top band, no more than 10% of the windscreen area | The band sits above the wiper sweep and outside primary vision |
| Any tinted glass | Reflectance no more than 10% | Mirror-look film is not a compliant option |
Compliance source: WA Department of Transport bulletin IB-119D, Road Traffic (Vehicles) Regulations 2014 and ADR14. Confirm current requirements if your vehicle has unusual glazing, modifications or imported specifications.
What to Expect from Mobile Tint Installation
On the Day
The appointment starts by confirming the vehicle, the glass condition and the proposed film, then checking that the work area is dry, clean and sheltered. Careful application depends on clean glass and controlled handling around window edges, seals and rear glass, which is exactly what an exposed location cannot offer.
You can help by removing personal items that block access to the windows and having the vehicle ready in the agreed covered space. Disclose any existing tint at quote stage so removal can be planned rather than discovered on the day. The finished work is inspected before handover.
Curing and Aftercare
Fresh film needs time to cure. Temporary haze, small water pockets or slightly uneven appearance can occur while the moisture used in application dries, and none of that means the film is faulty. Keep the windows closed until the aftercare guidance says otherwise.
Clean the glass gently with a soft cloth and a non-abrasive, ammonia-free cleaner, and keep blades and rough pads away from the film edges. Curing time varies with film, glass, temperature and humidity, so no fixed turnaround is promised. Retain your warranty documentation with the vehicle records.
The process end to end
- Send vehicle and covered-location details for a quote
- Confirm clean, dry and sheltered conditions
- Glass is inspected and the film confirmed
- Film is fitted and inspected on site
- Follow the supplied curing and aftercare guidance
Frequently Asked Questions
How much does car tinting cost in Rockingham?
From $249 for a standard passenger vehicle, with most Rockingham jobs between $249 and $550. The final figure depends on vehicle size, window layout, factory glass, the film chosen and whether old tint needs removing. Send your make, model, year and suburb for a written quote.
How long does window tint take to cure?
Curing varies with the film, glass, temperature, humidity and conditions on the day, so no fixed turnaround is promised. Temporary haze, water pockets or slight variation can appear while the film settles. Follow the aftercare guidance supplied for your SunTek CIR or Rayno Phantom S9 film.
Can you tint my car in an open driveway?
A covered location is preferred. A garage, carport or covered parking bay protects the work area from rain, wind and dust, and an open driveway often will not. The location can be checked before the appointment; the essentials are a clean, dry area with safe access around the vehicle.
Which films carry a lifetime warranty?
Both ranges fitted, SunTek CIR and Rayno Phantom S9, carry a lifetime manufacturer warranty subject to manufacturer terms. Confirm the installed film line at handover and keep your invoice and warranty records with the vehicle documents.
Do you cover suburbs around Rockingham?
Yes. Alongside Rockingham, the mobile service covers Baldivis, Safety Bay, Shoalwater, Warnbro, Waikiki, Port Kennedy, Secret Harbour, Cooloongup and Kwinana, plus the wider Perth metropolitan area.
Conclusion
For a Rockingham quote you can arrange around home or work, send the vehicle make, model, year and body style, your suburb, the covered installation location and the result you want. We can then weigh SunTek CIR and Rayno Phantom S9 options against your existing glass and the WA tint rules. Mobile tinting starts from $249, with a lifetime manufacturer warranty on both film ranges.